Vortex 2” two blade mechanical

 

Accuracy 4 points

Cutting diameter 5 points

Orange 4 points

Steel drum 3 points

Plywood 3 points

Blades 2 points

Image of Vortex Broadheads

 

Total score 21 with a blade sharpness rating of B

 

The Vortex line of heads, are fairly large swing open style mechanicals. This one is no different. It has a 2inch, cutting diameter when fully opened. When closed it still has 7/8” of blade surface exposed.

 I found the accuracy to be good, but it shot more like a fixed blade head out of my setup than a typical mechanical. In the plywood test the head made it most of the way through, stopping at the back of the blades and without damage. In the orange test the head had fully opened by the time it exited. On the front of the orange you could see the 7/8” slit that the blades cut when the first hit, therefore the head gets an extra point for starting to cut on the front of the orange. In the steel drum the vortex penetrated the first wall with the tip sticking in the back wall. One blade was bent pretty badly. The other blade had broken off the tip and was driven back into the ferule of the broadhead.  I was surprised at how well this large head penetrated into the steel drum, and at how well the blades held up. For such a large broadhead, the Vortex did a fine job of holding up throughout the tests. Overall I was impressed with the performance of this head and would recommend it to someone looking for a large cutting diameter two blade head. I would however recommend at least 60 ft/lbs of Kinetic energy before you even consider using this broadhead, and more would be better.

Please note as more test information becomes available, it will be updated and posted.  Make sure you check back periodically to see if the head you're curious about shows up on the measuring tape.  If you’re interested in donating a head for testing, email ckfitch3@aol.com or visit Huntingforums.com, Bows and Arrows forum and see 5shot.  Thank you and enjoy.  Return to the Main BroadHead Test Page.

 

 

Home | Search |  Tell-a-Friend | Contact Us | HuntingForums.com

 

ie4get_animated.gif (7090 bytes)Copyright 1998-2003 American-Hunter.com
Contact us  with questions or comments about this web site.
Last modified: July 30, 2003 

American-Hunter.com is independently owned and not affiliated with the National Rifle Association or it's magazine AMERICAN HUNTER.  American-Hunter.com or any part of it's pages is NOT responsible for wrong information!